Factory wholesale 38120 3.2V10Ah Cylindrical LiFePO4 cell to Uganda Factories
Short Description:
Factory wholesale 38120 3.2V10Ah Cylindrical LiFePO4 cell to Uganda Factories Detail:
| Specification of 3.2V10Ah LiFePO4 battery | |||
| Item | Parameter | Remark | |
| Typical Capacity | 10Ah@ 1C discharge | Discharge current 1C with 2.0V cut off. | |
| Minimum Capacity | 10 Ah@ 0.2C | ≥10Ah | |
| Typical voltage | 3.2V | ||
| Weight | 288g±12g | ||
| Impendence | ≤3mΩ | Less Than 3mΩ | |
| Charge current (CC-CV) |
Suggestion continue charge current | ≤1C(10A) | 0℃～45℃，Suggest the max charge current less than 1C. To Achieve the max. Service life. 0.2C（CC）to 3.65V, At 3.65V（CV）until the current ≤0.02C, then stop charge. (P.S: Large continue charge rate will reduction of the service life of the cell. Considering the high rate will lead to temperature rising, we are not suggest the battery pack work on high charge rate continue long time.) |
| Max charge current | ≤5C(50A) | ||
| Cut off voltage | 3.65V | ||
| Discharge | Max. continue discharge current |
≤20C(200A) | -20℃~60℃ suggest the max. charge current less than 1C. To Achieve the max. Service life. 0.2C（CC）to 2.0V, stop discharge. (P.S: Large continue discharge rate will reduction of the service life of the cell. Considering the high rate will lead to temperature rising, we are not suggest the battery pack work on high discharge rate continue long time.) |
| Max discharge current(short time) |
≤30C(300A) | ||
| Cut off voltage | 2.0V | ||
| Charging time |
Standard | 5h | Preference value |
| Quick-charge | 0.5h | ||
| Recommend SOC window | SOC：10%~90% | Suggest DOD 90% | |
| Charging temperature | 0℃~45℃ | During charge , ambient temperature should not exceed 45℃. | |
| Discharging temperature | -20℃~60℃ | Battery can work at specified temperature range with capacity loss in tolerance. | |
| Storage tempera ture |
One month | 0℃~45℃ | |
| One year | 0℃~35℃ | ||
| Storage humidity | ＜70﹪ | ||
|
Technical parameters |
|
| Model | JKL-LFP38120 |
| Battery material (the anode) | LiFePO4 |
| Size | ∅38 x 120mm |
| Weight | 288g |
| Max. continuous charge current | 2C（20A） |
| Max.continuous discharging current | 5C（100A） |
| Max. peak discharge current | 25C（250A） |
| Working temperature | （-20℃）to（+60℃） |
| Cycle life | ＞3500times(25℃,1C charge/discharge,100%DOD) |
| performance advantage field | Vehicle power supply, vehicle start battery & Stop-start battery |
| cell’s collection way | Bolted connection & welding connection, lower touch resistance, avoiding poor touch. |
3.2V10Ah cell performance curves show:
High rated discharge performance curve：
38120 cell peak discharge test curve：
3.2V10Ah cell testing curve（Cycle testing 3500 times based on 1C charge & discharge，100%DOD/time，capacity retention ≥80%.）
Product detail pictures:
Related Product Guide:
Why Is the Li-Ion Battery the Quickest Rising Battery Chemistry?
Mistakes In Choosing Car Battery Suppliers
With state-of-the-art technologies and facilities, strict good quality regulate, reasonable cost, exceptional assistance and close co-operation with prospects, we're devoted to supplying the top benefit for our customers for Factory wholesale 38120 3.2V10Ah Cylindrical LiFePO4 cell to Uganda Factories, The product will supply to all over the world, such as: Azerbaijan , Bogota , Uzbekistan , As a well educated, innovative and energetic staff,we are responsible for all elements of the research, design, manufacturing, sales and distribution. With studying and developing new techniques,we are not only following but also leading the fashion industry. We listen attentively to the feedback from our customers and provide instant communication. You will instantly feel our expertise and attentive service.
By John biddlestone
from Bulgaria
- 2017.03.08 14:45
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Caroline
from Singapore
- 2017.12.19 11:10
