Manufacturer of 38120 3.2V10Ah Cylindrical LiFePO4 cell for Indonesia Factories
Short Description:
Manufacturer of 38120 3.2V10Ah Cylindrical LiFePO4 cell for Indonesia Factories Detail:
| Specification of 3.2V10Ah LiFePO4 battery | |||
| Item | Parameter | Remark | |
| Typical Capacity | 10Ah@ 1C discharge | Discharge current 1C with 2.0V cut off. | |
| Minimum Capacity | 10 Ah@ 0.2C | ≥10Ah | |
| Typical voltage | 3.2V | ||
| Weight | 288g±12g | ||
| Impendence | ≤3mΩ | Less Than 3mΩ | |
| Charge current (CC-CV) |
Suggestion continue charge current | ≤1C(10A) | 0℃~45℃,Suggest the max charge current less than 1C. To Achieve the max. Service life. 0.2C(CC)to 3.65V, At 3.65V(CV)until the current ≤0.02C, then stop charge. (P.S: Large continue charge rate will reduction of the service life of the cell. Considering the high rate will lead to temperature rising, we are not suggest the battery pack work on high charge rate continue long time.) |
| Max charge current | ≤5C(50A) | ||
| Cut off voltage | 3.65V | ||
| Discharge | Max. continue discharge current |
≤20C(200A) | -20℃~60℃ suggest the max. charge current less than 1C. To Achieve the max. Service life. 0.2C(CC)to 2.0V, stop discharge. (P.S: Large continue discharge rate will reduction of the service life of the cell. Considering the high rate will lead to temperature rising, we are not suggest the battery pack work on high discharge rate continue long time.) |
| Max discharge current(short time) |
≤30C(300A) | ||
| Cut off voltage | 2.0V | ||
| Charging time |
Standard | 5h | Preference value |
| Quick-charge | 0.5h | ||
| Recommend SOC window | SOC:10%~90% | Suggest DOD 90% | |
| Charging temperature | 0℃~45℃ | During charge , ambient temperature should not exceed 45℃. | |
| Discharging temperature | -20℃~60℃ | Battery can work at specified temperature range with capacity loss in tolerance. | |
| Storage tempera ture |
One month | 0℃~45℃ | |
| One year | 0℃~35℃ | ||
| Storage humidity | <70﹪ | ||
|
Technical parameters |
|
| Model | JKL-LFP38120 |
| Battery material (the anode) | LiFePO4 |
| Size | ∅38 x 120mm |
| Weight | 288g |
| Max. continuous charge current | 2C(20A) |
| Max.continuous discharging current | 5C(100A) |
| Max. peak discharge current | 25C(250A) |
| Working temperature | (-20℃)to(+60℃) |
| Cycle life | >3500times(25℃,1C charge/discharge,100%DOD) |
| performance advantage field | Vehicle power supply, vehicle start battery & Stop-start battery |
| cell’s collection way | Bolted connection & welding connection, lower touch resistance, avoiding poor touch. |
3.2V10Ah cell performance curves show:
High rated discharge performance curve:
38120 cell peak discharge test curve:
3.2V10Ah cell testing curve(Cycle testing 3500 times based on 1C charge & discharge,100%DOD/time,capacity retention ≥80%.)
Product detail pictures:



Related Product Guide:
The Best Time to Replace Your Car Battery
Why Is the Li-Ion Battery the Quickest Rising Battery Chemistry?
With this motto in mind, we have become one of the most technologically innovative, cost-efficient, and price-competitive manufacturers for Manufacturer of 38120 3.2V10Ah Cylindrical LiFePO4 cell for Indonesia Factories, The product will supply to all over the world, such as: Kuwait , Mexico , Bulgaria , With more and more Chinese products and solutions around the world, our international business is developing rapidly and economic indicators big increase year by year. We have enough confidence to supply you both better solutions and service, because we've been more and more powerful, specialist and experience in domestic and international.
We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!








